Freshwater Fishing

  1. Home
  2. Sports
  3. Freshwater Fishing

More tests of fishing lines

Testing Fishing Lines

By Ronnie Garrison, About.com

Next they are supposed to do an Abrasion Test, To get the abrasion ratio, each line’s average cycles was then divided by its diameter. You take three 12-inch lengths of line and attach each one to one of the three arms on the machine. To the ends of each sample you attach a 550-grams or “about 1lb 4oz” weight. This allows the middle section of each line to rest over three separate drums of fine grade sandpaper at 45-degrees. When the machine is activated, the arms move up and down “this counts as one cycle” until all three lines have snapped. Each cycle is recorded on a separate clicker above the respective arm. It’s a very simple operation, but very effective and accurate. Each line is tested simultaneously, just in case there were any irregularities with any of the control arms.

Diameter is measured in the thousandth’s of an inch, with a micrometer for uniform diameter over the entire length. I feel that a lot more testing should be done on all lines manufactured as only a few companies manufacture line here in the USA, and is sold to other line companies to market as their brand of line. So now you know how line is tested. If you stay with a Name Brand Line Manufacture, you will get quality line, some of the lesser known line companies get the inferior line other manufactures get rid of because it did not meet some requirement, rather than toss it, it is sold to other companies, who market it under their name brand.

There you have it, you know as much as I know about fishing line, and how it is tested. The reason I did not go into various knots and applications is because we all have our own way of tying knots that we are accustomed too. I hope this has been interesting for you.

If you have any questions on anything in this article you can e-mail me at either RiverRat@Fish-Wisconsin.com or River_Rat_54494@yahoo.com. I’d like also to thank my friends at Crestliner Boats, Bombardier Motor Corp. Magic products, Lake-link.com, Fish-Wisconsin.com, Fishtheriver.com, Lowrance locators, St.Croix Rods, Heckels marine, Amherst Marine, Comprop Props, ISG Jigs, Reeds Sporting Goods, Big Fish Tackle Co., Ipsglass.com, Thermoilbatteries.com, Pepsi of Americas, Beckman nets, Trojan Batteries, Black-Widow Fishing Line, TICA Reels, Minn-Kota Trolling motors,Austackle Lures, Exciter Baits, Jere’s Bait and Tackle,Tennesse Trailers, and others who have helped me along the way. This article may not be reproduced, or used in any way without my written permission.

Bob is a Licensed Wisconsin Fishing Guide, and owner of Gone Fishing Guide Service. Specializing in Walleyes, on the Wisconsin River System. He is also an outdoors field reporter for many fishing web sites, Author, Historian on the Wis. River and the Petenwell Flowage in Central Wisconsin, and on many Pro-Staff programs for various tackle manufactures, Crestliner Boats, and Evinrude Outboards. He has written many articles on Walleye Fishing, and informational articles on the waters in Central Wisconsin.

Page one of this article >>>>>>>>>>

Explore Freshwater Fishing

About.com Special Features

Freshwater Fishing

  1. Home
  2. Sports
  3. Freshwater Fishing
  4. Getting Started Fishing
  5. Basic Fishing/Instruction
  6. Testing Fishing Lines

©2009 About.com, a part of The New York Times Company.

All rights reserved.